اكواد للموبايل الصينى جميع الانواع

Factory code
*#66*#

ـــــــــــــــــــــــــــــــــــــــــــــــــــــ
Engineer code
*#3646633


ــــــــــــــــــــــــــــــــــــــــــــــــــــــــــ
Check Phone code
*#87#

ــــــــــــــــــــــــــــــــــــ ـــــــــــــــــــــــ
Games code
*#12345#


ــــــــــــــــــــــــــــــــــــــــــــــــــــــــــ
Default Language code
*#0000# + send

____________________
Arabic Language code
*#0966# + send

ـــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــ
TheSainT
Mail:koko_bosss@hotmail.com
makary_thesaint@yahoo.com
Mobile:0107868330


اكواد الاجهزة الصينى
*#66*# Set Factory Mode CONFIRMED *#8375# Show Software Version CONFIRMED *#1234# A2DP ACP Mode CONFIRMED *#1234# A2DP INT Mode CONFIRMED *#0000# + Send : Set Default Language CONFIRMED *#0007# + Send : Set Language to Russian CONFIRMED *#0033# + Send : Set Language to French CONFIRMED *#0034# + Send : Set Language to Spanish CONFIRMED *#0039# + Send : Set Language to Italian CONFIRMED *#0044# + Send : Set Language to English CONFIRMED *#0049# + Send : Set Language to German CONFIRMED *#0066# + Send : Set Language to Thai CONFIRMED *#0084# + Send : Set Language to Vietnamese CONFIRMED *#0966# + Send : Set Language to Arabic CONFIRMED ================================================== ===== *#19992006# ---->phone reset(COPY D820 SAMSUNG) *#9426*357#----->COPY NOKIA 6280 ================================================== ===== default user code: 1122, 3344, 1234, 5678 Engineer mode: *#110*01# Factory mode: *#987# Enable COM port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200 Restore factory settings: *#987*99# LCD contrast: *#369# software version: *#800# software version: *#900# set default language: *#0000# Send set English language: *#0044# Send set English language (new firmware): *#001# Send ================================================== ==== also ========== Service codes BenQ: software version: *#300# test mode: *#302*20040615# Service codes Pantech: software version: *01763*79837# service menu: *01763*476# reset defaults (phone/user code reset to default): *01763*737381# Service codes 3xx, 5xx: software version: *#79# software version: *#837# Service codes VK200, VK2000, VK2010, VK2020, VK4000: software version: *#79# service menu: *#9998*8336# (hold #) reset defaults (phone/user code reset to default): *#9998*7328# (hold #) Service codes LG: software version: 2945#*# Service codes Sony-Ericsson: J100 software version: #82# Service codes Fly: 2040(i) reset defaults: *#987*99# Send MX200 reset defaults: *#987*99# Send MX200 software version: *#900# Send SL300m reset defaults: *#987*99# Send SL300m software version: *#900# Send SL500m reset defaults: *#987*99# Send SL500m software version: *#900# Send MP500 reset defaults: *#987*99# Send MP500 software version: *#900# Send Set language to English: *#0044# Set language to Russian: *#0007# Service codes Konka: C926 software version: *320# Send C926 set default language: *#0000# Send C926 set English language: *#0044# Send Service codes GStar: GM208 (Chinese Nokea 6230+) engineering menu: *#66*# Set language to English: *#0044# Set language to Russian: *#0007# Service codes Motorola: Motofone F3 software version: **9999* Send C113, C114, C115, C115i, C116, C117, C118 software version: #02#* C138, C139, C140 software version: #02#* C155, C156, C157 software version: #02#* C257, C261 software version: #02#* V171, V172, V173 software version: #02#* V175, V176, V176 software version: #02#* C168, W220 software version: *#**837# W208, W375 software version: #02#* ZTE Mobile:>1- *938*737381# 2- PHONE WILL DIPLAYED DONE 3- POWER OFF YOUR PHONE AND POWER ON AGAIN alcatel:>E205 unlocking phone code,only press***847# without simcard ==================================================




تحت التجربة
1-لمعرفة الاصدار(#0000#*#0044#*)
2-درجة وضوح الشاشهه(#369#*)
3-اعادةضبط المصنع(#99*987#*)




*#3646633

ــــــــــــــــــــــــــــــــــــــــــــــــــ ــــــــ
كود فحص الهاتف
*#87#
ــــــــــــــــــــــــــــــــــــ ـــــــــــــــــــــــ
كود الالعاب
*#12345#

ــــــــــــــــــــــــــــــــــــــــــــــــــ ــــــــ
اللغة الافترضية
*#0000# + send
____________________
اللغة العربية
*#0966# + send
______________________
اللغة الصينية
*#0084# + send
*#0086# + send
_______________________
اللغة الروسية
*#0007# + send
-----------------------



E900 software version: *#5002*8376263#
E900 full reset: *2767*3855#Service codes Spice:

S404 enable COM port: *#42253646633# -> Device -> Set UART -> PS -> UART1/115200
S410 engineer mode: *#3646633#
S900 software version: *#8375#
S900 serial no: *#33778#Service codes Philips:

S200 enable COM port: *#3338913# -> Device -> Set UART -> PS -> UART1/115200Service codes "Chinese" models:

default user code: 1122, 3344, 1234, 5678
Engineer mode: *#110*01#
Factory mode: *#987#
Enable COM port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200
Restore factory settings: *#987*99#
LCD contrast: *#369#
software version: *#800#
software version: *#900#
set default ********: *#0000# Send
set English ********: *#0044# Send
set English ******** (new firmware): *#001# SendService codes BenQ:

software version: *#300#
test mode: *#302*20040615#Service codes Pantech:

software version: *01763*79837#
service menu: *01763*476#
reset defaults (phone/user code reset to default): *01763*737381#Service codes VK-Mobile 3xx, 5xx:

software version: *#79#
software version: *#837#
service menu: *#85*364# (hold #)Service codes VK200, VK2000, VK2010, VK2020, VK4000:

software version: *#79#
service menu: *#9998*8336# (hold #)
reset defaults (phone/user code reset to default): *#9998*7328# (hold #)Service codes LG:

software version: 2945#*#
KG300 NVRAM format: 2945#*# -> menu 15Service codes Sony-Ericsson:

J100 software version: #82#Service codes Fly:

M100 software version: ####0000#
2040(i) reset defaults: *#987*99# Send
MX200 reset defaults: *#987*99# Send
MX200 software version: *#900# Send
SL300m reset defaults: *#987*99# Send
SL300m software version: *#900# Send
SL500m reset defaults: *#987*99# Send
SL500m software version: *#900# Send
MP500 reset defaults: *#987*99# Send
MP500 software version: *#900# Send
Set ******** to English: *#0044#
Set ******** to Russian: *#0007#Service codes Konka:

C926 software version: *320# Send
C926 set default ********: *#0000# Send
C926 set English ********: *#0044# SendService codes GStar:

GM208 (Chinese Nokea 6230+) engineering menu: *#66*#
Set ******** to English: *#0044#
Set ******** to Russian: *#0007#Service codes Motofone-F3:

Motofone F3 software version: **9999* Send
***300* Set SIM Pin
***310* / ***311* SIM Pin ON | OFF
***000* Reset Factory settings
***644* Set Voicemail number
***260* / ***261* Auto keypad lock ON | OFF
***510* / ***511* Voice Prompts ON | OFF
***160* / ***161* Restricted Calling (Phonebook only) ON | OFF
***200608* Send: software version
***200606* Send: software version
***200806* Send: flex version
***250* / ***251* Keypad tones ON | OFF
***470* Select time format
***500* /***501* Prepaid Balance Display ON | OFF
***520* Change ********Service codes Motorola:

C113, C114, C115, C115i, C116, C117, C118, C122 software version: #02#*
C138, C139, C140 software version: #02#*
C155, C156, C157 software version: #02#*
C257, C261 software version: #02#*
V171, V172, V173 software version: #02#*
V175, V176, V176 software version: #02#*
C168, C168i, W220 software version: *#**837#
C168, C168i, W220 master reset: *#**367628# Send
C168, C168i, W220 E2p reset: *#**778337# Send
W205, W208, W375 software version: #02#*

اكواد للاجهزه الصينيه ضبط مصنع+ضبط الشاشه+ضبط الرمز الشخصي+ضبط اللغه

--------------------------------------------------------------------------------

اكواد للاجهزه الصينيه ضبط مصنع+ضبط الشاشه+ضبط الرمز الشخصي+ضبط اللغه


اتقدم بهديه بسيطه الى منتدانا الجميل بهذه المشاركه المنقوله لغرض الفائده للجميعلضبط و شتغيل اللغة الانجليزية كود
PHP: *#0044# *#0000#



الرمز الشخصي الاصلي كود
PHP: 1122, 3344, 1234, 5678



اعادة ضبط المصنع كود
PHP: *#987*99#



لضبط اللغة الروسي كود
PHP: *#0007#
للدخول على ضبط المهندس كود
PHP: *#66*#
للدخول على ال test mode

كود
PHP: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200
درجة وضوح الشاشة كود
PHP: *#369#
اصدار السوفت وير


CODE for Chinese Mobile Phones

--------------------------------------------------------------------------------

*#66*# Set Factory Mode CONFIRMED
*#8375# Show Software Version CONFIRMED
*#1234# A2DP ACP Mode CONFIRMED
*#1234# A2DP INT Mode CONFIRMED
*#0000# + Send : Set Default Language CONFIRMED
*#0007# + Send : Set Language to Russian CONFIRMED
*#0033# + Send : Set Language to French CONFIRMED
*#0034# + Send : Set Language to Spanish CONFIRMED
*#0039# + Send : Set Language to Italian CONFIRMED
*#0044# + Send : Set Language to English CONFIRMED
*#0049# + Send : Set Language to German CONFIRMED
*#0066# + Send : Set Language to Thai CONFIRMED
*#0084# + Send : Set Language to Vietnamese CONFIRMED
*#0966# + Send : Set Language to Arabic CONFIRMED


More some codes for reset mobile china
*#77218114#
*#881188#
*#94267357#
*#9426*357#
*#19912006#
*#118811#
*#3646633#


CHINESE MODELS:

default user code: 1122, 3344, 1234, 5678

Engineer mode: *#110*01#

Factory mode: *#987#

Enable COM port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200

Restore factory settings: *#987*99#

LCD contrast: *#369#

software version: *#800#

software version: *#900#

set default language: *#0000# Send

set English language: *#0044# Send

set English language (new firmware): *#001# Send



also
==========
Service codes BenQ:
software version: *#300#
test mode: *#302*20040615#

Service codes Pantech:
software version: *01763*79837#
service menu: *01763*476#
reset defaults (phone/user code reset to default): *01763*737381#

Service codes **x, 5xx:
software version: *#79#
software version: *#837#
Service codes VK200, VK2000, VK2010, VK2020, VK4000:
software version: *#79#
service menu: *#9998*8336# (hold #)
reset defaults (phone/user code reset to default): *#9998*7328# (hold #)

Service codes LG:
software version: 2945#*#

Service codes Sony-Ericsson:
J100 software version: #82#

Service codes Fly:
2040(i) reset defaults: *#987*99# Send
MX200 reset defaults: *#987*99# Send
MX200 software version: *#900# Send
SL300m reset defaults: *#987*99# Send
SL300m software version: *#900# Send
SL500m reset defaults: *#987*99# Send
SL500m software version: *#900# Send
MP500 reset defaults: *#987*99# Send
MP500 software version: *#900# Send
Set language to English: *#0044#
Set language to Russian: *#0007#



Service codes Konka:
C926 software version: *320# Send
C926 set default language: *#0000# Send
C926 set English language: *#0044# Send

Service codes GStar:
GM208 (Chinese Nokea 6230+) engineering menu: *#66*#
Set language to English: *#0044#
Set language to Russian: *#0007#

ZTE Mobile:>1- *938*737381#
2- PHONE WILL DIPLAYED DONE
3- POWER OFF YOUR PHONE AND POWER ON AGAIN
alcatel:>E205
unlocking phone code,only press***847# without simcard



E900 software version: *#5002*8376263#
E900 full reset: *2767*3855#
Service codes Spice:
S404 enable COM port: *#42253646633# -> Device -> Set UART -> PS -> UART1/115200
S410 engineer mode: *#3646633#
S900 software version: *#8375#
S900 serial no: *#33778#
Service codes Philips:
S200 enable COM port: *#3338913# -> Device -> Set UART -> PS -> UART1/115200

Service codes "Chinese" models:
default user code: 1122, 3344, 1234, 5678
Engineer mode: *#110*01#
Factory mode: *#987#
Enable COM port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200
Restore factory settings: *#987*99#
LCD contrast: *#369#
software version: *#800#
software version: *#900#

Service codes BenQ:
software version: *#300#
test mode: *#302*20040615#

Service codes Pantech:
software version: *01763*79837#
service menu: *01763*476#
reset defaults (phone/user code reset to default): *01763*737381#
Service codes VK-Mobile **x, 5xx:
software version: *#79#
software version: *#837#
service menu: *#85*364# (hold #)
Service codes VK200, VK2000, VK2010, VK2020, VK4000:
software version: *#79#
service menu: *#9998*8336# (hold #)
reset defaults (phone/user code reset to default): *#9998*7328# (hold #)



Service codes LG:
software version: 2945#*#
KG300 NVRAM format: 2945#*# -> menu 15

Service codes Sony-Ericsson:
J100 software version: #82#

Service codes Fly:
M100 software version: ####0000#
2040(i) reset defaults: *#987*99# Send
MX200 reset defaults: *#987*99# Send
MX200 software version: *#900# Send
SL300m reset defaults: *#987*99# Send
SL300m software version: *#900# Send
SL500m reset defaults: *#987*99# Send
SL500m software version: *#900# Send
MP500 reset defaults: *#987*99# Send
MP500 software version: *#900# Send
Set language to English: *#0044#
Set language to Russian: *#0007#

Service codes Konka:
C926 software version: *320# Send
C926 set default language: *#0000# Send
C926 set English language: *#0044# Send

Service codes GStar:
GM208 (Chinese Nokea 6230+) engineering menu: *#66*#
Set language to English: *#0044#
Set language to Russian: *#0007#

Service codes Motofone-F3:
Motofone F3 software version: **9999* Send
***300* Set SIM Pin
***310* / ***311* SIM Pin ON | OFF
***000* Reset Factory settings
***644* Set Voicemail number
***260* / ***261* Auto keypad lock ON | OFF
***510* / ***511* Voice Prompts ON | OFF
***160* / ***161* Restricted Calling (Phonebook only) ON | OFF
***200608* Send: software version
***200606* Send: software version
***200806* Send: flex version
***250* / ***251* Keypad tones ON | OFF
***470* Select time format
***500* /***501* Prepaid Balance Display ON | OFF
***520* Change language

Service codes Motorola:
C113, C114, C115, C115i, C116, C117, C118 software version: #02#*
C138, C139, C140 software version: #02#*
C155, C156, C157 software version: #02#*
C257, C261 software version: #02#*
V171, V172, V173 software version: #02#*
V175, V176, V176 software version: #02#*
C168, W220 software version: *#**837#
W208, W375 software version: #02#*
and "yes"''
version *201206*4636#